Huawei FusionModule500 V100R021C10 User Manual page 193

FusionModule500 Smart Mini Data Center
User Manual
Maintenance
Area
Intelligent lithium
battery
monitoring system
Water sensor and
water detection
cable
Issue 01 (2020-11-30)
Maintenance
Item
Battery
management
alarm
Cleanliness
Battery
connection
Measurement of
the ambient
temperature of
the intelligent
battery
monitoring system
Functions of the
water sensor and
water detection
cable
Copyright © Huawei Technologies Co., Ltd.
Operation
-
-
-
-
Place the water
detection cable
into the water
and check
whether a water
leakage alarm is
generated by the
water sensor.
Expected Result Troubleshootin
g
No battery Identify the
management cause of an
alarm is alarm based on
generated. the alarm
information.
Wipe the battery Remove dust.
surface using a
piece of white
paper and the
paper does not
turn black.
Battery terminals Locate poor
and cables are in contact points
good contact. between battery
terminals and
cables.
The ambient Locate the
temperature of cause of an
the intelligent abnormal
battery temperature.
monitoring
system is lower
than 45°C.
A water leakage If a water
alarm is leakage alarm is
generated. not generated,
replace the
water detection
cable.
6 O&M
184