FusionModule500 Smart Mini Data Center
User Manual
6.4.3.10 Replacing an Electrode Water Sensor
Prerequisites
●
●
●
Procedure
Step 1 Disconnect the cable between the water sensor and the ECC800-Pro.
Step 2 Remove the faulty water sensor.
Step 3 Place the new water sensor in the correct position.
Step 4 Connect the water sensor cable connected to the ECC800-Pro to the new water
sensor.
----End
Issue 01 (2020-11-30)
Recommended tools and materials: Phillips screwdriver, crimping tool
A water sensor needs to be replaced.
A spare water sensor is available.
Copyright © Huawei Technologies Co., Ltd.
6 O&M
228