Huawei FusionModule500 V100R021C10 User Manual page 144

FusionModule500 Smart Mini Data Center
User Manual
Step 2 Set related outbox parameters.
1.
2.
If "Test email sending failed" is displayed, check whether the recipient's email
server requires CA certificate verification. If it is required, download the CA
certificate from the receiver's email website and upload it in the Mailbox
Certificate area.
Figure 5-13 Email setting page
The following email addresses are for reference only (the actual parameters apply) and are used
only for configuring the email function.
Table 5-13 Main parameters on the sender's email configuration page
Email
Type
Sina Mail
Issue 01 (2020-11-30)
Set related parameters in the Outbox Settings area on the Mailbox Settings
tab page. If the address type of the outbox is Domain name, choose System
Settings > System Parameters, and set related parameters in the DNS
Server Address area on the Monitor IP tab page.
NO TE
The DNS server address is provided by the local network operator.
Click Test to check the email sending. If an email fails to be sent, check the
outbox settings and DNS Server Address. If the email is sent successfully,
click Submit.
NO TICE
NO TE
Email
Server
Domain
Name
smtp.sina.co
m
Copyright © Huawei Technologies Co., Ltd.
Mailbox Server Encryption
IP Address Mode and
SMTP port
How to obtain: Non-
encryption: 25
5 Power-On Commissioning
Remarks
● The email
server must
135