Connecting To The Network - Huawei FusionModule500 V100R021C10 User Manual

FusionModule500 Smart Mini Data Center
User Manual
Prerequisites
●
●
Procedure
Step 1 Enter https://
box of the browser, and then press Enter to enter the WebUI login page.
Step 2 On the login page, enter the user name and password, select the desired
language, and click Log In.
Step 3 Choose System Settings > NMS Application.
Step 4 Select the NetEco tab. In the Communication Parameters area, set parameters
such as NetEco Deployment Location, Server IP, and Port Number, and click
Submit.
Table 5-22 EDCM parameters
Parameter
NetEco Location
Server IP
Port Number
----End

5.3.12.2.7 Connecting to the Network

Connect the network to the CloudOpera NetEco through the CloudOpera NetEco
app.
Prerequisites
●
●
Issue 01 (2020-11-30)
You have obtained the IP address of the ECC800-Pro as well as the user name
and password used for WebUI login.
You have obtained the IP address of the EDCM server.
ECC800-Pro IP address (such as https://192.168.1.10) in the address
NO TE
● An account is logged out due to a timeout if no operation is performed within 10
minutes after system login.
● A maximum of three users can log in to the ECC800-Pro WebUI at the same time.
You have logged in to the EDCM app.
You have set EDCM communication parameters on the ECC800-Pro.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
Setting
Local
Specifies the IP address of the EDCM
server.
NOTE
The IP address of the EDCM server must be
on the same network as the IP address of
the ECC800-Pro to ensure normal
interconnection between the EDCM app
and the ECC800-Pro.
31220
176