Setting Edcm Communication Parameters On The Ecc800-Pro - Huawei FusionModule500 V100R021C10 User Manual

FusionModule500 Smart Mini Data Center
User Manual
Procedure
Step 1 Set the IP address of the EDCM server.
1.
2.
Step 2 Open the EDCM app, and enter the Organization, Username, and Password.
Step 3 Tap Log In.
----End

5.3.12.2.6 Setting EDCM Communication Parameters on the ECC800-Pro

The ECC800-Pro can connect to the EDCM only after EDCM communication
parameters are set on the ECC800-Pro WebUI.
Issue 01 (2020-11-30)
When you log in to the app for the first time, the Server Settings screen is
automatically displayed.
Enter the server IP address and tap Next.
NO TE
In the lower right corner of the login screen, choose
server IP address.
NO TE
● Organization and Username are the tenant name registered on HUAWEI CLOUD.
● If you fail to log in for three consecutive times, the system automatically displays
Verification code.
NO TE
If no data is displayed on the screen or a message indicating a network error is displayed,
check whether the mobile device has properly connected to a WiFi or mobile network. If
the network is normal, check whether you have been forcibly logged out on the NetEco.
Copyright © Huawei Technologies Co., Ltd.
5 Power-On Commissioning
> Server settings to update the
175