Huawei FusionModule500 V100R021C10 User Manual page 43

FusionModule500 Smart Mini Data Center
User Manual
Item
4G
USB
SW button
Table 3-13 ECC800-Pro RF_Z parameters
Item
RF_Z Operation
Frequency
RF_Z EIRP (max.)
Issue 01 (2020-11-30)
Specifications
Supports the 4G module, SMS sending, and 3G
communication, and provides a standard SIM card slot.
1. China: 2G and 4G networks support China Unicom or
China Mobile SIM cards, and 3G networks support only
China Unicom SIM cards.
2. Outside China: Select SIM cards according to the following
wireless modes and frequency bands:
● 4G: wireless mode (FDD-LTE and TDD-LTE), coverage
frequency band (B1, B3, B5, B7, B8, and B20)
● 3G: wireless mode (WCDMA), coverage frequency bands
(B38, B40, and B41)
● 2G: wireless mode (GSM), coverage frequency band
(900/1800 MHz)
NOTE
The prerequisite for using a SIM card is that the site has signal
coverage.
● Supports USB 2.0 and 5 V, 1 A power supply.
● After installing the WiFi module, connect the WiFi module
to the ECC800-Pro using the app on the mobile phone or
PAD to view the basic information about the smart
module, such as layout, resources, energy efficiency,
environment, and alarms.
● You can insert a USB flash drive to export historical data
and configuration files and import configuration files.
● Restores the default IP address, factory settings, and user
information.
● Supports RF_Z networking.
Specifications
2405–2480 MHz
8 dBm
Copyright © Huawei Technologies Co., Ltd.
3 System Architecture
34