GE LPS-D Instruction Manual page 277

10 ALPS TEST PROGRAM 10.3 FILE MENU
10.3.6 SAVE INPUT QUANTITIES AS
This menu item results in a dialog box supplied by Microsoft. Therefore only the "OK" button of the dialog box
is tested.
Select Save Input Quantities As from the File menu. Select a drive, path, and file name to save the input
quantities of test.
Verify that this item worked by following the same procedure as for the Save Input Quantities menu item.
10.3.7 SAVE OUTPUT AS
This menu item results in a dialog box supplied by Microsoft. Therefore only the "OK" button of the dialog box
is tested.
Select Save Output As from the File menu. Select a drive, path, and file name from the dialog box to save the
test output. Click on OK and the file is saved.
10.3.8 PRINT
This menu item results in a dialog box supplied by Microsoft. Therefore only the OK button of the dialog box is
tested.
Select Print from the File menu. This is a standard MS-Windows dialog box. It behaves however Microsoft and
MS-Windows determines it should behave. There is one exception, both the Selection and Pages buttons are
disabled. Click on OK. The output is printed as it appears on the screen.
10.3.9 PRINT SETUP
This menu item results in a dialog box supplied by Microsoft. It can be tested only to the extent that it does get
displayed and that it behaves in the same manner as other similar dialog boxes in other programs.
Select Print Setup from the File menu. This is a standard MS-Windows dialog box. It behaves however
Microsoft and Windows determines it should behave.
10.3.10 LAST 4 OPENED SETTINGS FILES
The last 4 opened settings files are displayed in the File menu, and may be selected here.
10.3.11 EXIT
Save all open test files (windows). Select Exit from the File menu. The program exits.
If you have not saved the current file, select Exit from the File menu. A message box is displayed asking if you
want to save the modified test. Click on OK. The program saves the file and exits.
10
GE Power Management LPS-D Line Protection System 10-
13