GE LPS-D Instruction Manual page 288

11.2 ALPS-LINK INSTALLATION
11
Installation of ALPS-Link and its accompanying software packages (ALPS-Set, Xpression Builder, and ALPS-
Test) is accomplished as follows.
1. Ensure that Microsoft Windows
2. Insert the GE Power Management CD into your CD-ROM drive or direct your web browser to the GE
Power Management website at www.GEindustrial.com/pm. The Products CD is essentially a "snap-
shot" of the GE Power Management website at the date indicated on the CD and should launch automati-
cally in your default web browser (if not, it may be opened manually). As such, the procedures for
installation from the CD and the Web are identical. To ensure the most recent software, installation from
the Web is recommended.
3. Click the Index by Product Name menu item from the GE Power Management main page and then select
LPS Line Protection System from the product list to open the LPS-D product page.
4. Select the Software item from the Product Resouces List to proceed to the LPS-D software page.
5. The latest version of the ALPS-Link software suite will be shown along with some support materials. Click
on the ALPS/LPS PC Software menu item and download the installation package to your local PC. Run the
downloaded installation program.
11-
4
®
is running on the local PC.
Figure 11–2: GE POWER MANAGEMENT WELCOME SCREEN
LPS-D Line Protection System
11 ALPS-LINK USER GUIDE
11.2.4 SOFTWARE INSTALLATION
GE Power Management