2 CALCULATION OF SETTINGS
2 CALCULATION OF SETTINGS 2.1 INTRODUCTION
There are a number of settings that must be made in the LPS-D relaying system. These settings are divided
into two categories, with each category divided into the sub-groups shown below:
a) GENERAL SETTINGS CATEGORIES
•
CONFIGURATION
•
COMMUNICATIONS
•
OSCILLOGRAPHY
•
EQUIPMENT DUTY
•
PROGRAMMABLE INPUTS
b) PROTECTION SETTINGS CATEGORIES
•
Z1DISTANCE
•
Z2DISTANCE
•
Z3DISTANCE
•
Z4DISTANCE
•
CURSUPVISN
•
OVERCURRNT
•
VOLTAGE
•
BLK RECLOS
•
LINEPICKUP
•
REMOTEOPEN
•
LINEOVERLD
•
SCHEME
•
SCHEMETIMERS
•
LINE INFO
•
SCADA_DTA
•
OS BLOCKING
•
RECLOSER
•
NONCRIT_AL
•
OUTPUTS
The sub-categories (defined by their mnemonic) are given in the order that they appear when scrolled in the
display provided on the front of the LPS-D.
Up to four separate and distinct Protection Settings Groups can be programmed and stored in the LPS-D.
Selection of the settings group to be used can be made via the keypad, through the communications link or
through external contacts applied to selected programmable inputs.
The General Settings category applies to all schemes and all settings groups regardless of which Settings
Group is selected.
GE Power Management
LPS-D Line Protection System
2.1 INTRODUCTION
2.1.1 DESCRIPTION
2-
1
2