Share Group Maps And Associated Keys - Motorola KEY 3000 User Manual

KVL 3000 User's Guide
Share Group Map
and Associated
Keys
5-6
In this scenario, a specific group map (and
associated keys) is shared from the source KVL
to the target KVL. (This procedure is identical to
loading a group map from the KVL to a target
radio. The KVL will recognize that it is loading to
another KVL and automatically switch to a share
operation.)
1. With both KVLs turned on and connected
via the transfer cable, navigate to and
select GROUP in the Main Menu. The
following screen will appear:
GROUP MAP>0
EDIT
2. Press the or
Group Map you wish to share.
3. Press to select LOAD. The
flash on both KVLs, and both displays will
show the progress of the sharing
process, first with the group map data,
then with the traffic keys associated with
the specific group map.
4. When finished, the source KVL emits a
success tone and displays GROUP
TRANSFER SUCCESSFUL (target KVL
shows SHARE
indicate a successful sharing operation.
5. Repeat this process for each Group Map
you wish to share (up to four supported
by KVL).
LOAD
keys to select the
will
SUCCESSFUL) to
ASN Operation