Share Selected Keys - Motorola KEY 3000 User Manual

Share Selected
Keys
ASN Operation
Chapter 5 Sharing Keys Between KVLs
In this scenario, a specific traffic or shadow key
is shared from the source KVL to the target KVL.
(This procedure is identical to loading a key from
the KVL to a target radio. The KVL will recognize
that it is loading to another KVL and
automatically switch to a share operation.)
Important! In order to share a selected key,
the target KVL must be able to support the
algorithm of the key being shared.
1. With both KVLs turned on and connected
via the transfer cable, navigate to and
select TRAF or SHAD in the Main Menu.
The following screen will appear (typical
traffic key shown):
TRAF>xx
ALGO DES
LID xxxx
EDIT
2. Press to select LOAD. The
flash on both KVLs, and both displays will
show the progress of the sharing process
(this occurs very quickly).
3. When finished, the source KVL emits a
success tone and displays KEY LOAD
SUCCESSFUL (the target KVL shows
SHARE SUCCESSFUL) to indicate a
successful sharing operation.
LOAD
will
5-5