Motorola KEY 3000 User Manual page 90

KVL 3000 User's Guide
Using Group
Maps (continued)
4-28
6. Repeat steps 4 and 5 until you have
mapped the desired number of source
and target keys (up to 16). After reaching
traffic slot number 15, the next press of
the key will display the Common
Shadow Key screen, as shown:
GROUP MAP 0
S SHAD 0
D SHAD>CSK
NOCHG
7. Using the keypad, enter the slot number
for the Common Shadow Key stored in
the KVL 3000 that you wish to map to the
shadow key target slot. Again, you may
either press the Enter key, or wait a
moment for automatic confirmation. A
CSK is required in OTAR systems only. If
the target device does not require a CSK,
select NOCHG.
8. When finished mapping the keys in this
group map, press the Enter key. The
following screen will appear:
GROUP MAP 0
OFFSET J
continued on next page
ZERO
ASN Operation