Perform Initial
Programming
(continued)
ASN Operation
Chapter 3 Performing Initial Programming
System Dependent Parameters
(continued)
Set Modem Dialing to Pulse or Tone
downloading keys from a KMC to the KVL 3000
via a modem connection, the KVL 3000 can be
set to dial using either pulses or DTMF tones,
depending on the type of phone line being used.
Set accordingly as follows:
1.
Navigate to the CONFIG menu, then
navigate to and select DIAL. The
following screen will appear:
DIAL METHOD
IS TONE
PULSE
2.
Press
to select TONE or PULSE, as
desired.
When
TONE
3-25