Motorola KEY 3000 User Manual page 106

KVL 3000 User's Guide
Loading Keys
from KVL 3000 to
KMC (continued)
Important LIDs are not
transferred with the keys
to the KMC. The KMC au
tomatically assigns a new
unique LID to all keys en
tered into the KMC.
Important If the key
load fails, make sure that
the KMC is setup to ac
cept the type of key (TRAF
or SHAD) and algorithm
type being transferred
from the KVL 3000.
6-6
5. Use the key to select LOAD. The
following screen will appear:
TRAF xxxx
LOAD TO XXXX
XFER
Note that you do not have to select a
target slot when transferring a key to the
KMC. The KMC can accept only a single
key at a time and controls where each key
is loaded.
6. Use the key to select XFER. The
following screen will appear:
LOADING KEY
XXXX TO XXXX
7. When finished, the screen will display
KEY LOAD SUCCESSFUL to confirm
that the key was loaded to the KMC.
z End of This Procedure z
ASN Operation