Motorola KEY 3000 User Manual page 78

KVL 3000 User's Guide
Loading Traffic
Keys (continued)
4-16
5. Use the keypad to enter the location
number into which you wish to store the
System Key. When finished, press the
Enter key. The following screen will
appear:
TRAF 0
LOAD TO 0
6. Use the or keys to select the
desired target slot, then press the Enter
key.
7. Use the key to select XFER. The
following screen will appear while the key
is being loaded:
LOADING KEY
XXXXX TO XXXX
continued on next page
XFER
ASN Operation