Motorola KEY 3000 User Manual page 43

Perform Initial
Programming
(continued)
ASN Operation
Chapter 3 Performing Initial Programming
User Preference Parameters (continued)
2. Use the key to select SETUP . The
following screen will appear.
ALGO>DES
IS ON
IS DEFAULT
ON/OFF
3. Use the or
non default algorithm. Then use the
key to select DEFLT to make this
algorithm the default.
Note This action automatically removes
the default status from the other algorithm.
Turning the Prompt On/Off
When accessing the screen to enter a key, you are
prompted (if prompt is turned on) to select an
algorithm and press ACCEPT before entering the
actual key characters. By turning the prompt off,
you can bypass this step and go directly to the
screen in which you enter the key characters. If
desired, turn the prompt off as follows.
1. Navigate to the CONFIG menu, then
navigate to and select ALGO. The
following screen will appear:
DEFAULT ALGO
IS DES
PROMPT ON
SETUP
continued on next page
DEFLT
keys to select the
PROMPT
3-7