Motorola KEY 3000 User Manual page 110

KVL 3000 User's Guide
Loading Keys
from KMC to the
KVL 3000 using
Modem
Connection
Note The KVL 3000
supports most single
functionPCMCIAmodem
cards. Multi function
cards (e.g., Modem/LAN
cards) may have unique
software requirements,
and therefore may not
work with the KVL 3000.
6-10
PCMCIA Modem Card Procedure
In this procedure, encryption keys stored in the
KMC are downloaded to the KVL 3000 via a
PCMCIA modem card.
Note The KVL 3000 must have a USK assigned
for the algorithm type of the keys being
downloaded, and the USK must match the USK
defined in the KMC. Also, the KVL 3000 must
have an MDC ID configured (refer to Chapter 3
Performing Initial Programming for details
on setting the USK and MDC ID).
1. Request that the KMC operator set up the
KMC to download keys to a KVL.
2. Insert the PCMCIA modem into the
KVL 3000 and connect the cable to the
phone line as shown below.
MODEM/TELEPHONE LINE
CABLE
(SUPPLIED WITH MODEM)
CONNECT
PHONE LINE
HERE
continued on next page
PCMCIA
MODEM CARD
INSERTED
IN SLOT
ASN Operation