Motorola KEY 3000 User Manual page 71

Loading Traffic
Keys (continued)
ASN Operation
Chapter 4 Entering and Loading Keys
5. For normal key loading, you will load
the key into the target's main key
storage. To do this, follow steps 6
through 8. For diagnostics purposes,
you may instead load the key directly
into a special diagnostics location (i.e.,
the hybrid). To do this, follow steps 9
through 11.
6. Use the or keys to select the
desired target slot, then press the Enter
key.
7. Use the key to select XFER. The
following screen will appear:
LOADING KEY
XXXX TO XXXX
8. When finished, the screen will display
KEY LOAD SUCCESSFUL to confirm
that the key was loaded to the target
radio.
End of Normal Keyloading Procedure
9. Use the key to select HYBRD. The
following screen will appear:
TRAF 0
LOAD TO HYBD
HYBRD
continued on next page
XFER
4-9