Loading Traffic
Keys (continued)
ASN Operation
Chapter 4 Entering and Loading Keys
Loading Traffic Keys
(Fixed Unit Target; More than 16 keys;
DVI XL Algorithm)
In this procedure, a single key is loaded to a
fixed unit (e.g., CIU, DIU, RNC, etc.).
1.
Turn on the KVL 3000 and the target fixed
unit, then connect them using the
appropriate cable.
2.
Use the
key to select TRAF from the
Main Menu. The following screen will
appear:
TRAF>0
ALGO DES
LID xxxx
EDIT
3.
Use the
or
traffic key you wish to load to the target
radio (or use the keypad to directly enter
the location number).
4.
Use the
key to select LOAD. The
following screen will appear:
ENTER THE
SYSKEY SLOT
>J
continued on next page
LOAD
keys to select the
4-15