Motorola KEY 3000 User Manual page 277

KVL 3000 User's Guide
Porting Keys
within the
KVL 3000
(continued)
Note Since in this ex
ample the key selected
for porting uses the DES
algorithm, you will be
prompted in the next step
to select either DES XL or
DES OFB. Had the se
lected key's algorithm
been DVI XL or DVP XL,
the key would be ported
using the same algorithm
and you would not be
prompted to select an al
gorithm.
1-6
4. Use the or keys to select the
traffic key you wish to port (or use the
keypad to directly enter the location
number). (In this example, 15 has been
selected.)
5. Use the key to select SELECT. The
following screen will appear:
PORT
PID:0015
CKR>J
SELECT
6. Use the keypad to enter the CKR for the
ASTRO 25 memory location into which
you wish to port the key. (Remember,
traffic keys must be ported to the TEK
memory location range of 1-4095;
shadow keys must be ported to the KEK
memory location range of 61440 -
65535.) When finished, press the Enter
key. The following screen will appear.
SELECT ALGO:
DES–XL
DES–OFB
ACCEPT
continued on next page