Share Selected Key - Motorola KEY 3000 User Manual

KVL 3000 User's Guide
Share Selected
Key
Note If sharing a DVI XL
key, the System Keys in
both KVL 3000s must
match in order to suc
cessfully complete the
sharing procedure.
6-6
In this scenario, a specific TEK or KEK is shared
from the source KVL 3000 to the target
KVL 3000.
Important! In order to share a selected key,
the target KVL must be able to support the
algorithm of the key being shared.
1. With both KVLs turned on and connected via
the transfer cable, navigate to and select
TARGET in the Main Menu of the source
KVL 3000. The following screen will appear:
TARGET
LOAD
2. Use the key to select LOAD. The
following screen will appear:
LOAD
KEY
3. Use the key to select KEY. The
following (typical) screen will appear:
CKR 00002
ALG:DES-XL
KID:1234
LOAD
continued on next page
ZERO
GROUP
ASTRO 25 Operation