Motorola KEY 3000 User Manual page 50

KVL 3000 User's Guide
Perform Initial
Programming
(continued)
3-14
User Preference Parameters
(continued)
Select Default Target Slot
allows the KVL 3000 to load keys to a default slot
on the target unit. Setting a default eliminates
the need to select a target slot during a keyload
operation (although you can override the default
if desired when loading keys). To set a default
target slot, perform the following:
1. Navigate to the CONFIG menu, then
navigate to and select SLOT. The
following screen will appear:
DEFAULT
TARGET SLOT
IS EMPTY
EDIT
2. Use the key to select EDIT. The
following screen will appear.
ENTER
SLOT #
>J
3. Using the keypad, enter the desired
default target slot (range is 0000 through
1023). When finished, press the Enter
key.
This setting
CLEAR
ASN Operation