Motorola KEY 3000 User Manual page 250

Viewing/Loading OTAR
Configuration
Parameters
(continued)
ASTRO 25 Operation
Chapter 7 Using KVL 3000 in OTAR Systems
Loading a TGTRSI, KMFRSI, or MNP into
Target Device
In this procedure, you will connect the KVL 3000
to a target device (radio. DIU, RMC, etc.) and
load a TGTRSI, KMFRSI, or MNP into the device.
1. Turn on the KVL 3000 and the target
device, then connect them using the
appropriate cable.
2. Use the key to select TARGET from
the Main Menu. The following screen will
appear:
TARGET
LOAD
3. Press to select LOAD. The following
screen will appear:
LOAD
KEY
continued on next page
ZERO
GROUP
7-39