Copying Keys From A Kmc To A Kmf - Motorola KEY 3000 User Manual

Copying Keys
from a KMC to a
KMF
Chapter 1 Using the Key Porting Feature
Overview
Copying existing keys from a KMC and loading
them into a KMF involves the following three
major steps:
D Connect the KVL 3000 to the KMC and
load the desired keys from the KMC into
the KVL 3000 memory
D Port the keys (which are in ASN format) to
ASTRO 25 format within the KVL 3000
memory
D Connect the KVL 3000 to the KMF and
load the keys into the KMF

Load the Keys from KMC into KVL 3000
1. Make sure the KVL 3000 is in ASN mode
(as described in Switching Between ASN
and ASTRO 25 Operation behind the
MIGRATION tab), and that KMC mode is
enabled (navigate to KMC within the
CONFIG menu and select ON).
2. Connect the KVL 3000 to the KMC using
either a direct or modem connection and
download the desired keys (as described
in Chapter 6 Using KVL 3000 in OTAR
Systems behind the ASN OPERATION
tab).
 Port the Keys from ASN to ASTRO 25
Since the keys were loaded from a KMC, they
are in ASN format (i.e., stored according to PIDs
and containing LIDs). Before loading the keys
into the KMF, you must first port the keys to
ASTRO 25 format. To do this, perform the
procedures beginning on page 1-5 of this
chapter.
1-11