Motorola KEY 3000 User Manual page 39

Perform Initial
Programming
(continued)
ASN Operation
Chapter 3 Performing Initial Programming
User Preference Parameters
The parameters and settings in this category are
not required for operation of the KVL 3000, but
instead provide a way of customizing certain
functions to suit each individual user.
Set Power Down Timeout
Timeout feature allows you to program a time
period (from 30 to 255 seconds). If the KVL 3000
remains idle for the programmed time period, it
will power down. To set the timer:
1. Navigate to the CONFIG menu, then
navigate to and select TIMEO. The
following screen will appear:
TIMEOUT
IS 255
EDIT
2. Press to select EDIT. The following
screen will display. Enter the desired
timeout time (in seconds). The range is
from 30 to 255.
TIMEOUT
>J
3. Press the Enter key to save the new
value.
The Power Down
3-3