Motorola KEY 3000 User Manual page 107

Loading Keys
from KMC to the
KVL 3000 using
Direct Connection
ASN Operation
Chapter 6 Using KVL 3000 in OTAR Systems
In this procedure, encryption keys stored in the
KMC are downloaded to the KVL 3000 via a
direct cable connection.
Note The KVL 3000 must have a USK assigned
for the algorithm type of the keys being
downloaded, and the USK must match the USK
defined in the KMC. Also, the KVL 3000 must
have an MDC ID configured (refer to Chapter 4
Preparing the KVL 3000 for Use for details
on setting the USK and MDC ID).
1. Connect the KVL 3000 to the rear panel of
the KMC according to the KMC User's
Guide instructions. The KVL 3000 may be
connected to various types of KMC
platforms, as follows:
Series 900 KMC
CKN6324
To RS232 Port
on KVL 3000
Series XR KMC
CKN6324
To RS232
Port
on KVL
3000
Model 3400 KMC
To RS232
CKN6324
Port
on KVL
3000
continued on next page
TTN5124A
To RJ 45 Port
on KMC Rear Panel
Null Modem
Adapter
To DB 25 Port
on KMC Rear
Panel
Null Modem
Adapter
To DB 25 Port
on KMC Rear
Panel
6-7