Server Management - HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual

Diagnostic Tools
NOTE: The driver name Diagnostics Multiprocessor Driver was set in step 5 of "Running
Diagnostics" in this section. If the user selected a different name from this suggested
name, that name will be displayed in the list of drivers.

Server Management

Insight Manager 7 and its previous versions (Insight Manager XE and Insight
Manager) are comprehensive network management tools that monitor and control the
operation of HP servers and clients. These utilities use the Management Agents to
monitor key subsystems and diagnose potential problems. For more information
about the server management tools, refer to the following website:
www.hp.com/servers/manage
The server management tools are available on the Management CD, which ship with
32-bit servers, or the following website:
www.compaq.com/support/files/server
Select your server and operating system from the drop-down menus.
Server Management on 64-bit Servers
Neither Insight Manager 7 nor previous versions of Insight Manager can be run
directly on a 64-bit server. You must install Insight Manager 7 (or previous version)
on a 32-bit Windows-based client PC that is connected to the 64-bit server through a
network connection. Special 64-bit management agents are provided on the server-
specific support software CD that ships with your server. These agents are installed
on the 64-bit server and interface with the version of Insight Manager running on the
32-bit computer.
For more information on how to install the 64-bit management agents on a 64-bit
server, refer to your 64-bit server-specific user documentation. Insight Manager 7 (or
previous version) is not shipped with 64-bit servers. This utility is included on the
Management CD that ships with all 32-bit ProLiant servers. Insight Manager 7 and
previous versions are also available for download from the HP website at
www.hp.com/servers/manage
4-8 HP Servers Troubleshooting Guide