HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual page 185

Table C-2: Non-Numeric Error Messages or Beeps Only
Error Code
No Keyboard Present
No SCSI Devices
Detected
Non-System disk
or disk error
Parity Check 2
PCI User Definable
Features Detected
and Configured with
Default Settings. Run
System Configuration
Utility to View/Modify
Settings
HP Servers Troubleshooting Guide
Audible Probable Source of
Beeps Problem
None Keyboard failure
occurred, or keyboard not
connected to server.
None No SCSI devices are
connected to the boot
controller.
None No bootable disk partition
was found on the boot
drive.
None A PCI device generated a
parity error 2.
None PCI card is not properly
configured.
POST Error Messages
continued
Action
1. Turn off the computer,
and then reconnect the
keyboard.
2. Be sure that no keys are
depressed or stuck.
3. If this does not solve the
problem, replace the
keyboard.
Check configuration, SCSI
cable, connected drives, and
SCSI IDs.
1. Remove diskette from
diskette drive.
2. Check controller order in
server setup utility.
3. Check boot order in
server setup utility.
4. Reinstall operating
system.
1. Remove recently
installed PCI adapters.
2. Reinstall the adapters
one at a time to
determine which one is
generating errors.
3. Replace the failed
device.
Run the server setup utility to
make desired changes.
continued
C-5