POST Error Messages
600 Series POST Error Messages
Table C-8: 600 Series POST Error Messages
Error Code
601-Diskette
Controller Failed
601-Diskette
Controller Error
601-Diskette
Controller Error
The drive is not
installed correctly or
has failed. Make sure
that power and drive
cables are connected,
both to the drive and
the system board.
Also verify that the
cables are the correct
cables for your
computer model. If
this message persists,
you may need service
for your PC.
C-28
Audible
Probable Source of
Beeps
Problem
None
Diskette-controller
circuitry failure occurred.
None
Diskette-controller
circuitry failure occurred.
None
CD-ROM/diskette drive
assembly is not seated
correctly. A controller
circuitry failure occurred.
Action
1.
Be sure the diskette drive
cables are connected.
2.
Replace the diskette
drive, the cable, or both.
3.
Research and replace
failed assembly as
indicated.
1.
Be sure that the diskette
drive cables are
connected.
2.
Replace the diskette
drive, the cable, or both.
3.
Research and replace
failed assembly as
indicated.
1.
Be sure that the
CD-ROM/diskette drive
assembly is properly
inserted.
2.
Be sure that the cables
are connected to the
backplane.
3.
Replace the CD-
ROM/diskette drive
assembly, or the cable,
or the backplane, or all
three.
4.
Research and replace
failed assembly as
instructed.
HP Servers Troubleshooting Guide
continued