HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual page 134

Table 5-2: System Configuration Utility Settings for Booting into Diagnostics
continued
Option
Network IP address
Network IP net mask
Network IP router
address
If you configure the server to restart and then access the Diagnostics and Utilities
menu, it prepares for remote communication. You can run Diagnostics, the Inspect
Utility, or the server setup utility remotely by using a workstation running terminal
emulation software, such as Insight Manager 7.
HP Servers Troubleshooting Guide
Setting Description
xxx.xxx.xxx.xxx Enter the IP address for this server in standard dot
notation.
NOTE: The network IP address is not used if you
select Custom for Network controller. You must
enter your IP address in the NET.CFG file that you
load into the system partition.
xxx.xxx.xxx.xxx Enter the net mask for this server in standard dot
notation.
NOTE: The network IP net mask is not used if you
select Custom for Network controller. You must
enter your IP address in the NET.CFG file that you
load into the system partition.
xxx.xxx.xxx.xxx Enter the router to be used for this server in
standard dot notation.
NOTE: The network IP router address is not used
if you select Custom for Network controller. You
must enter your IP address in the NET.CFG file that
you load into the system partition.
Error Recovery
5-13