Chapter 1 Preparations of operation
Turning power ON/OFF
1.
2.
3.
4.
5.
6.
10
Turning power ON
Switch ON the machine.
Press the foot switch pedal to lift the work clamp.
Foot switch pedal
Set the pattern sheet.
Fix the pattern sheet with adhesive tape on the feed plate to prevent displacement.
Press the foot switch pedal to lower the work clamp.
Moving the needle closer to the pattern sheet by turning the pulley allows
easier programming.
Pattern sheet
Press
on the programmer.
P
The needle moves to the home position.
2-3 mm
Programmer