Deleting a part of the program during programming
1. Press
.
C
2. Input the number of stitches to be deleted
and press
The example is deleting 2 stitches backward. Press
3. The needle point moves to 6.
4. Continue programming.
Moving a part of continuous program in parallel
Feed
Pattern A
Pattern B
Calling data
1. Specify the program number on the
operation panel and press the read/write
switch to read the data.
.
Pattern C
Chaprter 3 Programming with Command Function
A program can be modified during programming.
The example in the left is used for explanation of
deleting 2 stitches at 8 and creating a new program.
.
2
A part of continuous program is moved in parallel.
The example in the left is used for explanation of
moving patterns B an C in parallel.
Programmer
157