Brother BAS-311E Instruction Manual page 56

2. Select with
3. Select with
4. Input the data number and press
5. Press .
ESC ESC
Moving to position 4.
1. Select with
2. Press
9 9 9
The work clamp moves from the start position by each stitch.
3. When the needle point reaches 4, press
The work clamp stops. If the work clamp passes, input a few
stitches and press . The needle returns for a few stitches of
the input.
4. Press .
ESC ESC
Programming a new point.
1. Select with
2. Move the work clamp with
when the needle point is at 5'.
and press .
and press .
and press .
and press .
and press
Chapter 2 Programming with Help Function
.
.
.
. Press
55