Brother BAS-311E Instruction Manual page 140

2. Connect each direction change point on the
inside line with the matched direction
change point on the outside line using a line.
3. Provide one point (or more points) between
the above two direction change points, and
connect them using a line.
Follow the procedure for curve points specification.
Specify points in pairs on the inside and outside lines. The lines
should be spaced uniformly.
Programming
1. Press .
P
The work clamp moves to the home position and the
programmer screen is displayed.
2. Move the work clamp with
when the needle point is at point q of
L
the pattern.
The first stitch (point q) is programmed.
3. Press
5 0 0
@7
@5
@4
@6
@3
@1
@0
@2
!9
e
r
!8
q
and .
M
Chaprter 3 Programming with Command Function
@8
@9
!1
!0
#0
o
u i
!2
y
!3
!5
!4
t
!6
w
!7
. Press
Programmer
#2
#1
#3
#4
139