Creating basting data
Create basting data.
1.
Select
and press
2.
Move the needle with
Creating split data
Specify breakpoints for sewing a series of different patterns.
1.
Select
and press
2.
Use
to specify whether to stop the needle at the lower end or not,
then press
.
.
, then press
Remaining plot count
Distance from the previous point in the
direction of X or Y axis
.
ON: The needle stops at the lower end.
OFF: The needle stops at the upper end.
Programmer
Chapter 2 Programming with Help Function
.
Thread breakage is not carried on.
Thread breakage is carried on.
93