Adding escape point before the first stitch
The escape point is a provisional point provided for prevention of the work clamp interference with the needle or
the bar leg when the work clamp is lifted at the start point.
Calling data
1. Press
.
P
The work clamp moves to the home position. The programmer
screen is displayed.
2. Select
with
3. Select
with
4. Input the data number and press
5. Press
.
ESC
ESC
Moving to position 1
1. Select
with
2. Press
and press
1
The work clamp moves to the sewing start position.
3. Press
.
ESC
ESC
An escape point is added before the sewing start
position. The example in the left is used for
explanation of setting escape point A.
and press
.
and press
.
.
and press
.
.
Chapter 2 Programming with Help Function
65