Chapter 2 Programming with Help Function
3.
4.
The following five options are available for creating a circle.
1.
2.
84
Move the needle with
Stitch length
Press
twice at the sewing end position.
Creating a circle
Creating a circle by specifying 3 points on the circumference
Creating a circle of the specified diameter in the clockwise direction
Creating a circle of the specified diameter in the counterclockwise direction
Creating a circle of the specified radius in the clockwise direction
Creating a circle of the specified radius in the counterclockwise direction
Select
and press
Select the method of creating a circle and press
and press
Remaining plot count
Distance from the previous point in the
direction of X or Y axis
.
Programmer
.
Check that both values are
0.00 mm.
.