Resizing
1. Move the needle to the reference point of
resizing with
The pattern is resized to the home position if the needle is not
moved.
2. Press
8
8
8
Input the resizing command.
3. Press
1
5
0
Input the resizing percentage for the X axis. Specify the
magnification percentage by 3 digits in
is specified in the example.
4. Press
1
5
0
Input the resizing percentage for the Y axis. Specify the
magnification percentage by 3 digits in
is specified in the example.
5. Input the stitch length. Press
If the stitch length is 0.0, the pattern is resized with the same
number of stitches as the original data.
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
Ending program
1. Press
.
P
.
and press
.
M
and press
.
F
. 150%
and press
.
M
. 150%
.
L
Programmer
Chaprter 3 Programming with Command Function
143