Brother BAS-311E Instruction Manual page 50

Creating a stitch pattern
1. Create a pattern in consideration of the most
inside and outside lines for a multiple stitch.
The two lines should be spaced uniformly.
2. Connect each direction change point on the
inside line with the matched direction
change point on the outside line using a line.
3. Provide one point (or more points) between
the above two direction change points, and
connect them using a line.
Follow the procedure for curve points specification.
Specify points in pairs on the inside and outside lines. The lines
should be spaced uniformly.
Programming
1. Press .
P
The work clamp moves to the home position and the
programmer screen is displayed.
@8
@7
@5
@4
@6
!1
@3
@1
!0
@2
o
u i
y
!9
e
r
t
!8
w
q
Programmer
Chapter 2 Programming with Help Function
Should be spaced
uniformly.
Outside line
@9
#2
#1
#0
!2
#3
#4
!3
!5
!4
!6
!7
Inside line
49