Brother BAS-311E Instruction Manual page 46

8. Press .
ESC ESC
9. Select with
10. Select ON/OFF of needle stopping at the
bottom with
11. Program pattern 2.
12. Program pattern 3 in the similar manner.
13. When pattern 3 is programmed, press
Inputting the end code
1. Select with
2. Select the end code type with
press .
"111" is selected in the example. Press
returns to the first stitch(point A).
3. Press .
ESC ESC
The work clamp returns to the home position.
Saving
1. Select with
and press .
and press .
ESC ESC
and press .
and
and the work clamp
and press .
Programmer
Chapter 2 Programming with Help Function
.
45