Chapter 3 Programming with Command Function
Command to be used
This function is available only when the needle is at the home position.
1.
2.
3.
4.
5.
184
Resizing
8
8
8
M
F
M
Make sure that the needle is at the home position.
Press
if the needle is not at the home position.
R
Determine the reference point for resizing with
Input
8
8
8
M
Input the magnification in 3 digits in the X direction and press
Magnification values of 0 - 400 are available for input.
Input the magnification in 3 digits in the Y direction and press
Magnification values of 0 - 400 are available for input.
Resizing a pattern in the X and Y directions
Used to input magnification in the X direction.
Used to input magnification in the Y direction.
.
Programmer
.
.
F
.
M