Setting The Extended Option Output - Brother BAS-311E Instruction Manual

Chapter 4 Extended Option Output

Setting the extended option output

Items to be set are as follows:
When setting is complete, be sure to press
To cancel the set value, input
To register the setting into the machine, carry out operation of "Writing the extended
option output data" (page 199).
196
Extended option output number
Operation setting
Output condition
Timer 1
Timer 2
Extended option output No.
Operation setting
Timer 1
Programmer
Specify a number out of 1 - 16. Refer to "Table of extended option
output" (Refer to page 205 .)
Select one out of ON, OFF, FLIP and FLOP with
Input conditions for the extended option output. 3 conditions can be
specified. Refer to "Table of extended option output"
(Refer to page 205 .)
Set the time until the output varies after the output condition is established.
Input the value in unit of 10 ms. Value of 0 or 10 - 2550 ms is set.
Set the time for implementation of the extended option output. Input the
value in unit of 10 ms. Value of 0 or 10 - 2550 ms is set.
When the value is 0, the output remains varying.
.
Output condition
Timer 2
and press
0 0 0
P
.
.