Chapter 3 Programming with Command Function
Moving the escape point
Calling data
1. Specify the program number on the
operation panel and press the read/write
switch to read the data.
Moving to position A.
1. Press
and press
1
The work clamp moves to the escape point.
Programming a new point.
1. Press
.
F
2. Move the work clamp with
when the needle point is at B of the
L
pattern.
B is programmed.
Deleting 1
1. Press
and press
1
The needle point returns to A.
2. Press
.
C
3. Input the number of stitches to be deleted
and press
The example is deleting 1 stitch. Press
152
.
.
.
1
The position of the escape point is moved. The
example in the left is used for explanation of moving
the escape point from A to B.
. Press
.
Programmer