Parallel Stitch - Brother BAS-311E Instruction Manual

Chapter 3 Programming with Command Function
5.
Command to be used
1.
2.
3.
174
Repeat steps 3 and 4 and move the needle to the end point. Input
.
1 1 E
When the alarm sound is complete, the needle point moves to the end position.

Parallel stitch

3 M
M
7 8 9 L
7 8 8 L
1 E
1
Select the sewing start position with
Determine the width and input
Move the needle with
Creating parallel stitch in the same direction to the sewing
path. Input the width of parallel stitch in
Values 1.0 - 9.9 mm are available for the width.
Example Width
1.5mm
Input the stitch length in
Carrying out parallel stitch on the left side to the sewing path.
Carrying out parallel stitch on the right side to the sewing
path.
Starting parallel stitch calculations.
(This is the end code. Refer to page 179 for details.)
3
to select the second point, then press
Programmer
.
Input
315
.
and press
L
.
M
.
.
L