Chapter 5 Reading/Writing Data
Reading additional data
This is used to read other data continuously after reading a data.
Additionally read data is added to the editing data as a split data.
This operation cannot be available in command mode.
Data created in BAS-300 and BAS-300A series can also be read.
1.
2.
3.
Checking the image display (go to 7 when not checking)
4.
5.
212
Select
and press
Select
and press
Input the number of program with a numeric key.
If there is data,
appears.
If there is no data,
appears.
Press
and select
Press
to turn on.
Press
to turn off again.
.
.
appears, the data is from BAS-300 or BAS-300A series.
.
Programmer
OFF is highlighted if selected.