Chapter 5 Reading/Writing Data
Writing data to a floppy disk
Writes data from the programmer to a floppy disk.
If there is data for creation, data can be written by pressing by pressing the Read/Write
button on the operation panel.
Be sure to use a formatted 2HD floppy disk. The floppy disk accompanying this product is
already formatted.
This operation cannot be available in command mode.
1.
2.
3.
214
Select
and press
Select
and press
Input the number of program with a numeric key.
If there is data,
appears.
If there is no data,
appears. If
.
.
appears, the data is from BAS-300 or BAS-300A series.
Programmer