Brother BAS-311E Instruction Manual page 43

Chapter 2 Programming with Help Function
5. When point B is programmed, press
The number of pressing
method.
Selecting the symmetrical pattern type
1. Select with
2. Select the symmetrical pattern type and
press .
(symmetric to Y axis) is selected in the example.
3. Input the number of feed boundaries to be
ignored and press
Refer to "Editing the current data" (page 98) for details.
4. The needle point moves slowly from point B
to point A in the right half and it is
automatically programmed. Press
make fast movement.
5. Press twice.
ESC ESC
Inputting the end code
1. Select with
2. Select the end code type with
press .
"111" is selected in the example. Press
returns to the first stitch(point A).
3. Press .
ESC ESC
The work clamp returns to the home position.
42
ESC ESC
depends on the programming
ESC ESC
and press
.
and press
and the work clamp
Programmer
.
.
to
.
and