Chapter 3 Programming with Command Function
Command to be used
1.
2.
Command to be used
1.
2.
188
Copying to the Y axis
4
4
2
L
Move the needle to the desired position.
Input
4
4
2
L
Copying in the reverse direction
4
4
3
L
Move the needle to the desired position.
Input
4
3
L
4
Copying data to the Y axis passing the current needle position
from the start point or the feed point (excluding the number of
feed boundaries to be ignored) to the current needle position
.
Copying data in the reverse direction from the start point or
the feed point (excluding the number of feed boundaries to be
ignored) to the current needle position
.
Programmer