Brother BAS-311E Instruction Manual page 133

Chapter 3 Programming with Command Function
3. Program pattern 1.
4. Input point B and press
5. Move the work clamp with
when the needle point is at point C of the
L
pattern.
6. Program pattern 2.
Inputting the end code
1. Press
L
1 1 1 E
The work clamp returns to the start position.
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
Ending program
1. Press .
P
132
.
F
at the last stitch and press
.
. Press
Programmer
Pattern 1
Pattern 2