Programming example
Frequently used programming method is explained here. Refer to "Programming" (page 161) for function
and operation of each icon.
Programming for each stitch
Programming
1. Press
.
P
The work clamp moves to the home position and the
programmer screen is displayed.
2. Move the work clamp with
when the needle point is at point A of the
L
pattern.
The first stitch (point A) is programmed.
3. Repeat step 2 and create the program to
point C.
Inputting the end code
1. Press
L
1
1
1
E
The work clamp returns to the start position.
Saving
1. Specify the program number on the
operation panel and press the read/write
switch for writing into the floppy disk.
at the last stitch and press
.
Chaprter 3 Programming with Command Function
Program each stitch according to the pattern. The
example in the left is used for explanation.
. Press
Programmer
125